Brief introduction to the establishment of a biochar processing plant…
Overhaul maintenance of wood shredder…
In order to processing high quality charcoal we must first take the bar well, this is the preliminary mechanism of carbon forming, therefore, for what is the production of the key link, is very good for rice husk charcoal raw material,…
Special mechanical equipment Hongrun new charcoal machine equipment auxiliary products pressing carbon powder molding machine machine is the production of Arabia bituminous coal water. Shisha charcoal press we Hongrun using new technology an…
Hopper feeder, feeding quantity measured by spiral speed controller, by changing the speed of the motor, thereby changing the feeding flow.Because of the change of the material level, the filling coefficient of the screw is different, so the…
Speed. Speed and feeding of BBQ charcoal equipment flow in a certain range. There is a linear relationship between the lower or higher than this range, the linear relationship will change, the impact of material added.…
The mechanism of charcoal is sawdust, peanut shell, corn stalk, rice husk, bagasse, lees, bamboo chips, such as waste, after drying, high temperature and high pressure process, pressed into a round or square edge, with holes Xinbang, then pu…
The flue gas recovery and purification system can be used for recycling and recycling the flue gas of the charcoal factory, and the pollution of the flue gas can be discharged without pollution.How do the charcoal plant flue gas waste,…
Continuous carbonization furnace is sawdust, rice husk, peanut shell, straw, wood bark material containing carbon (volume below 15mm in the condition of high temperature granular) of dry distillation furnace, anaerobic carbonization and char…
The propeller is a key component of the mechanism of charcoal machine, its operation principle is very simple, with the main mechanism charcoal machine forming sleeve of sawdust raw materials rods during the treatment, …