Hongrun
rotary dryer is a charcoal raw material drying equipment used for drying sawdust, grain, bagasse, bamboo, and other high moisture materials. It can dry the crushed raw materials quickly with high capacity in charcoal production line.
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charge and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The rotary dryer cylinder is a rotation cylinder with slight inclination with the horizontal line. The materials enter from the higher end, and the heat carrier enters from the lower end; the two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
Hongrun
rotary dryer feeding and discharging unit is installed with thermocouple to control drier temperature. The temperature change of drier's feeding end can be indicated by the thermometer to control the inner drier temperature (generally 250-350°C).
Hongrun series machine have crusher,
rotary dryer, charcoal molding machine,
carbonization furnace and can successive deal with material until finishing molding charcoal products. If you are interested in Hongrun rotary dryer, please do not hesitate to contact us, we will offer you best service.
